LaCie 730 headaches
LaCie 730 headaches
- Subject: LaCie 730 headaches
- From: Jim Mitchell <email@hidden>
- Date: Fri, 15 May 2009 20:01:06 -0500
- Thread-topic: LaCie 730 headaches
We just purchased 8 LaCie 730s to replace our old Apple 30 inch HD displays.
We have only swopped out 4 of the monitors so far and we have run into
calibration problems. All our Macs are Dual-Core Intel chip sets running OSX
10.5.6, and one running 10.5.5. All Macs are running the same video card,
ATI Radeon HD 3870. I understand that 10.5.6 is broken for DDC monitor
control. My problem is that on 2 of the Mac's the LaCie blue eye pro PE
1.0.2 runs fine. On the 2 other Macs the program runs very slow, like and
hour to run thru the calibration program. And the profile it creates doesn't
adjust the monitor. The settings in the blue eye pro software are set to
Gamma 1.8, Kelvin 5000, and cd/m2 to 120. After an hour to complete the
profile build, the profile it built to Gamma 2.2, Kelvin 6913 and cd/m2 189.
I've switched monitors and cables from the non-working units to the working
units and they check out fine.
On the Macs I can't get the blue eye pro to work properly, I've been using
the Eye One Match, which builds an ok profile but no as good as the blue eye
pro does on the units that the blue eye works on. My question, what's going
on??? Anyone have any ideas?
We even upgraded one of the non-working Macs to OSX 10.5.7 to see if it
would make a difference with calibrating using the blue eye pro and it
didn't.
Has anyone used Color eyes with the LaCie and what were your results.
Jim Mitchell
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden