Re: LaCie 730 headaches
Re: LaCie 730 headaches
- Subject: Re: LaCie 730 headaches
- From: Doyle Yoder <email@hidden>
- Date: Fri, 15 May 2009 21:26:45 -0400
On May 15, 2009, at 9:01 PM, Jim Mitchell wrote:
All our Macs are Dual-Core Intel chip sets running OSX
10.5.6, and one running 10.5.5. All Macs are running the same video
card,
ATI Radeon HD 3870. I understand that 10.5.6 is broken for DDC monitor
control.
DDC is only broken in 10.5.6 on PPC chip boxes. Don't know for sure
about 10.5.7 on intel boxes. Blue Eye Pro 4.2.2 runs fine on MacPro
and 10.5.7.
My problem is that on 2 of the Mac's the LaCie blue eye pro PE
1.0.2 runs fine.
I am curious about this, what is it? The latest version Blue Eye Pro
should be 4.2.2.
On the 2 other Macs the program runs very slow, like and
hour to run thru the calibration program. And the profile it creates
doesn't
adjust the monitor. The settings in the blue eye pro software are
set to
Gamma 1.8, Kelvin 5000, and cd/m2 to 120. After an hour to complete
the
profile build, the profile it built to Gamma 2.2, Kelvin 6913 and cd/
m2 189.
I've switched monitors and cables from the non-working units to the
working
units and they check out fine.
On the Macs I can't get the blue eye pro to work properly, I've been
using
the Eye One Match, which builds an ok profile but no as good as the
blue eye
pro does on the units that the blue eye works on. My question,
what's going
on??? Anyone have any ideas?
We even upgraded one of the non-working Macs to OSX 10.5.7 to see if
it
would make a difference with calibrating using the blue eye pro and it
didn't.
Has anyone used Color eyes with the LaCie and what were your results.
Jim Mitchell
Have you contacted Lacie?
Doyle
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden