Re: [OFF-LIST] Re: ColorBase
Re: [OFF-LIST] Re: ColorBase
- Subject: Re: [OFF-LIST] Re: ColorBase
- From: Ken Fleisher <email@hidden>
- Date: Wed, 13 Apr 2011 17:12:16 -0400
That's a very fair question. Before I began working here, they did try using
GMG and ColorBurst. The problem is that we have eight printers in four
locations on at least two separate LANs (which don't see each other). One
location has one printer and one computer. 2nd location has one printer and
two computers that must print to it. 3rd location has one printer and three
computers that must print to it. 4th location as the rest of the printers
with eight computers that must print to all printers. So, we would need
multiple print servers, running multiple RIPs per print server. The
complexity and expense of setting this up is just too much, especially
considering that we only would need the RIP for the purpose of printer
calibration. We do not do page layout, CMYK, or print anything other than
photos.
Maybe there is an easier way to set it all up and I'm always open to
suggestions.
On Wed, Apr 13, 2011 at 4:58 PM, Terence Wyse <email@hidden> wrote:
> Hi Ken, I always read your posts with interest!
>
> Question (and I'll be blunt and to the point):
> With all the users and such that you have and the size of your
> organization, why haven't you invested in a good RIPing solution yet like
> GMG Colorproof or similar and simply dispensed with all the headaches of
> trying to use Epson's RGB drivers? Many, if not all, of the current issues
> you're describing now and in the past would disappear overnight...seriously.
>
> :-)
>
> We should talk! ;-)
>
> Regards,
> Terry Wyse
>
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden
| References: | |
| | >ColorBase (From: Ken Fleisher <email@hidden>) |