Re: 8mm aperture
Re: 8mm aperture
- Subject: Re: 8mm aperture
- From: Claas Bickeböller <email@hidden>
- Date: Sat, 12 Oct 2013 09:08:02 +0200
Roger,
the KM CM-2500c is a 45:a0 instrument which you can automate on the ColorScoutA+.
It has a measurement area of 7mm with 11mm illuminated area.
But this combination will not be below your expected price point.
Best regards
Claas
Am 12.10.2013 um 00:46 schrieb Roger Breton:
> Thank you Mike and Edmund.
>
> The iO in multimode could be a workable approach. That's a thought.
> As for Minolta, the only thing I'm aware of is their FD-7, but it's only the usual 3.4mm.
> There's the 939, which can open up all the way to 16mm. But that's going to be tedious for reading in scads of IT8.7/4s.
> I found some old Spectrolino 8mm from a guy in Germany but it's a small fortune.
> Better stick with the Barbieri.
>
> Incidentally, I am quite pleased with the inter-instrument agreement between the Spectro LFP and the Spectroscan.
> At least on the substrates/ink combinations I tested so far.
> And it's fast. And versatile.
> It's just the price that's holding me :(
>
> Thank's guys!
>
> / Roger
>
> -----Original Message-----
> From: colorsync-users-bounces+graxx=email@hidden [mailto:colorsync-users-bounces+graxx=email@hidden] On Behalf Of edmund ronald
> Sent: Friday, October 11, 2013 6:19 PM
> To: Mike Strickler
> Cc: 'colorsync-users?lists. apple. com' List
> Subject: Re: 8mm aperture
>
> http://sensing.konicaminolta.us/applications/color-measurement/
>
> On Fri, Oct 11, 2013 at 11:25 PM, Mike Strickler <email@hidden> wrote:
>> Roger, the only other auto-measuring solution I can think of would be an i1 IO used in multi-measurement patch mode. This could be quite slow, however, as you would need at least 3 measurements per patch to get a decent average on a very noisy sample. If you have access to a Spectroscan this will not be much slower and will do a good job.
>>
>>
>>
>>>
>>> Message: 1
>>> Date: Fri, 11 Oct 2013 13:11:36 -0400
>>> From: Roger Breton <email@hidden>
>>> To: email@hidden
>>> Subject: 8mm aperture
>>> Message-ID: <011a01cec6a4$f124cca0$d36e65e0$@videotron.ca>
>>> Content-Type: text/plain; CHARSET=US-ASCII
>>>
>>> Hello fellow ColorSyncers,
>>>
>>>
>>>
>>> I require a large aperture opening 0/45 instrument for doing some low
>>> LPI silk-screen characterization.
>>>
>>> Other than the excellent Barbieri SpectroLFP solution, is there
>>> anything else that comes to your mind?
>>
>>
>> _______________________________________________
>> Do not post admin requests to the list. They will be ignored.
>> Colorsync-users mailing list (email@hidden)
>> Help/Unsubscribe/Update your Subscription:
>> 0gmail.com
>>
>> This email sent to email@hidden
>
> _______________________________________________
> Do not post admin requests to the list. They will be ignored.
> Colorsync-users mailing list (email@hidden)
> Help/Unsubscribe/Update your Subscription:
>
> This email sent to email@hidden
>
> _______________________________________________
> Do not post admin requests to the list. They will be ignored.
> Colorsync-users mailing list (email@hidden)
> Help/Unsubscribe/Update your Subscription:
>
> This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden