LAM +AMT 8 + LC Problems with LOGIC 5.5 X)
LAM +AMT 8 + LC Problems with LOGIC 5.5 X)
- Subject: LAM +AMT 8 + LC Problems with LOGIC 5.5 X)
- From: Cyril Blanc <email@hidden>
- Date: Thu, 16 Jan 2003 06:36:59 +0100
Hello
I don9t know if you can do something for this problem
I have tried to configure Audio Midi Setup, does not change anything !
While I am at it : is Audio Midi Setup fully functional
Thanks in advance.
Best regards
Cyril Blanc
France
------ Forwarded Message
From: Cyril Blanc <email@hidden>
Date: Thu, 16 Jan 2003 05:32:50 +0100
To: "email@hidden Emagic.de" <email@hidden>
Subject: Re: ::HL0222382:: (was: Fwd: LAM +AMT 8 + LC Problems with LOGIC
5.5 X)
Hello Lennert,
Thank you very much for you answer.
I have tried to switch on the AMT 8 after I have Launch Logic,
That does not solve my problem !
When I launch Logic without the AMT 8 serial port are correctly affected.
When I power on my AMT 8 Serial port 1 to 8 are moved automatically to
Unitor ports 1 to 8 !!!! strange !!!
Serial port 9 is moved to serial port 1 and so on
When Logic scans for Midi port, it has to look for serial and then for USB
You have to understand that it is a hell to have to re-affect the 24 port
for each songs I have(I am an old Notator user on Atari)
Thanks in advance for a quick fix
Best regards
Cyril
On 1/15/03 13:49, "email@hidden" <email@hidden> wrote:
>
>
Hello Mr. Blanc,
>
>
since the operating system is taking care of all the audio and MIDI
>
drivers, there is no possibilty to change the device order within Logic.
>
>
You have to change the MIDI out ports by hand.
>
It may work that you disconnect the AMT MIDI Interface before you boot your
>
system. So then the operating system can initialize the other interfaces
>
first. Then connect your AMT again.
>
>
>
Best regards,
>
>
>
Lennert Niemeyer, emagic support
>
>
>
>
--------------------------------------------
>
On 1/14/2003 email@hidden wrote:
>
>
> Hello,
>
> Thank you very much for your reply.
>
> Audia is very good for simple problems helping new users.
>
> I do not think they can answer this one, same for the BUG REPORT I sent a
>
> week ago ! (I did not had any feed back neither by you neither by Audia
>
> France)
>
> Best regards
>
> Cyril
>
> On 1/13/03 15:53, "Emagic Support" <email@hidden> wrote:
>
>> Dear Emagic customer, we have recieved your supportmail. Please note:
>
>> Emagic has a network of international distribution partners
>
> who
>
>> are responsible for sales, support and service in each of their
>
> territories.
>
>> They are ideally situated to provide the best localized support possible.
>
>> Because of this, we advise our international customers to refer to their
>
>> national Emagic distributor when they have technical or other questions,
>
> or
>
>> wish to purchase upgrades and other products. Therefore we have
>
>> forwarded your Supportmail to Emagic France AUDIA SA Parc Des Petites
>
>> Landes BP 32 Rue de Milan 44470 Thouari Nantes France Tel. : +33 2 40 18
>
>> 37 08 Fax : + 33 2 40 18 37 07 Emagic Hotline: 0153 36 80 94 E-mail:
>
>> email@hidden -------------------------------------------- On Monday,
>
>> January 13, 2003 12:24:17 PM email@hidden wrote:
>
>>> Hello I bought an AMT8 to handle the Logic Control. I have a Stealth
>
>>> port and 2 serial midi interfaces networked (8 ports
>
> each
>
>>> ) With Logic Platinum MAC OS 9 I have no problems. With Logic Platinum
>
>>> MAC OS X I have to redefine all my midi
>
> configuration
>
>>> as the AMT 8 comes first in the list of midi ports Do you have a
>
>>> solution ? If not can you fix this urgently Thanks in advance. Best
>
>>> regards Cyril Blanc France email@hidden The box said "Use
>
>>> Windows 95 or better" so I got a Macintosh
>
>>
>
>
>
------ End of Forwarded Message
_______________________________________________
coreaudio-api mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/coreaudio-api
Do not post admin requests to the list. They will be ignored.