Re: FxPlugs in Snow Leopard
Re: FxPlugs in Snow Leopard
- Subject: Re: FxPlugs in Snow Leopard
- From: Matt Rhodes <email@hidden>
- Date: Tue, 8 Sep 2009 09:07:01 -0700
Hey Team.
I had a similar experience.
I recently upgraded to FC Studio 3 in Leopard. Everything was fine.
Then I upgraded OS X to Snow Leopard (a few weeks later) and the
Zaxwerks FxPlugs went missing.
I reinstalled FC Studio and now everything is fine again.
I don't know if this problem is affecting our users yet.
Matt Rhodes
Zaxwerks, Inc.
Hi Wes,
An upgrade install should work, and keep your Studio intact, but it
sounds like something went wrong on your machine. You didn't mention
that Motion won't launch; that's another interesting data point that
suggests that something is wrong with your studio install.
This is probably the problem:
Library not loaded: /Library/Frameworks/FxPlug.framework/Versions/A/
FxPlug
Referenced from: /Library/Application Support/ProApps/SharedA/
Frameworks/Motion/Ozone.framework/Ozone
Reason: image not found
It sounds like the FxPlug framework isn't installed. I'd suggest re-
installing Final Cut Studio.
- Paul
On Sep 8, 2009, at 10:43 AM, Wes Plate wrote:
On 9/7/09 5:09 PM, "Andy Mees" <email@hidden> wrote:
Is it just your own and third party plugs that are not loading or
are all the
FxPlugs missing in action, are they missing FCP only or in Motion
too?
Both our FxPlug and plug-ins from Red Giant and GenArts aren't
loading.
Motion won't even launch on my system so I'm afraid I can't test
that. The
plug-in of ours is the same bundle that came off a MacPro running
10.5 and
FCP7 where the plug-in works fine.
On 9/7/09 6:01 PM, "Paul Schneider" <email@hidden> wrote:
There's nothing special you need to do to make your plugins work in
SnowLeopard. The same plugins should work on both operating systems.
When you upgraded your system to SnowLeopard, did you upgrade a
Leopard partition with Final Cut Studio already installed? Or did
you
install onto a new partition? If it was a new partition, did you run
the Final Cut Studio installer on your new SnowLeopard install?
Final
Cut Studio must be installed on your boot volume, and you must run
the
installer. Drag install is not supported.
I upgraded, I did not do a clean install. I know that upgrading is
generally not recommended but I like to try it because I figure
that's what
most users at home are likely to do. Should I remove FCS and
reinstall?
It would also be helpful if you included the console messages
directly. Summarizing what the console "complains about" is less
helpful.
Here are the messages I get when I launch FCP...
9/8/09 8:42:36 AM [0x0-0x513312e].com.apple.FinalCutPro[13063]
objc[13063]: Class CinDPX_FrameFlipper is implemented in both
/Library/QuickTime/Cineon.component/Contents/MacOS/Cineon and
/Library/QuickTime/DPX.component/Contents/MacOS/DPX. One of the two
will be
used. Which one is undefined.
9/8/09 8:42:36 AM [0x0-0x513312e].com.apple.FinalCutPro[13063]
objc[13063]: Class DataRequestObject is implemented in both
/Library/QuickTime/Cineon.component/Contents/MacOS/Cineon and
/Library/QuickTime/DPX.component/Contents/MacOS/DPX. One of the two
will be
used. Which one is undefined.
9/8/09 8:42:36 AM [0x0-0x513312e].com.apple.FinalCutPro[13063]
objc[13063]: Class CinDPX_ThreadSafeQueue is implemented in both
/Library/QuickTime/Cineon.component/Contents/MacOS/Cineon and
/Library/QuickTime/DPX.component/Contents/MacOS/DPX. One of the two
will be
used. Which one is undefined.
9/8/09 8:42:36 AM [0x0-0x513312e].com.apple.FinalCutPro[13063]
objc[13063]: Class CinDPX_PlayFrame is implemented in both
/Library/QuickTime/Cineon.component/Contents/MacOS/Cineon and
/Library/QuickTime/DPX.component/Contents/MacOS/DPX. One of the two
will be
used. Which one is undefined.
9/8/09 8:42:36 AM [0x0-0x513312e].com.apple.FinalCutPro[13063]
objc[13063]: Class CinDPX_CompletionRtnObject is implemented in both
/Library/QuickTime/Cineon.component/Contents/MacOS/Cineon and
/Library/QuickTime/DPX.component/Contents/MacOS/DPX. One of the two
will be
used. Which one is undefined.
9/8/09 8:42:36 AM [0x0-0x513312e].com.apple.FinalCutPro[13063]
objc[13063]: Class GT_LSSFrame is implemented in both
/Library/QuickTime/Cineon.component/Contents/MacOS/Cineon and
/Library/QuickTime/DPX.component/Contents/MacOS/DPX. One of the two
will be
used. Which one is undefined.
9/8/09 8:42:36 AM [0x0-0x513312e].com.apple.FinalCutPro[13063]
objc[13063]: Class GT_LSSObject is implemented in both
/Library/QuickTime/Cineon.component/Contents/MacOS/Cineon and
/Library/QuickTime/DPX.component/Contents/MacOS/DPX. One of the two
will be
used. Which one is undefined.
9/8/09 8:42:39 AM Final Cut Pro[13063] Error loading
/Library/Application
Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Ozone:
dlopen(/Library/Application
Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Ozone,
265):
Library not loaded: /Library/Frameworks/FxPlug.framework/Versions/A/
FxPlug
Referenced from: /Library/Application
Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Ozone
Reason: image not found
9/8/09 8:42:39 AM Final Cut Pro[13063] Error loading
/Library/Application
Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Ozone:
dlopen(/Library/Application
Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Ozone,
265):
Library not loaded: /Library/Frameworks/FxPlug.framework/Versions/A/
FxPlug
Referenced from: /Library/Application
Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Ozone
Reason: image not found
9/8/09 8:42:41 AM Final Cut Pro[13063] Error loading
/Library/Frameworks/Compressor.framework/Versions/A/Frameworks/
CompressorKit
.framework/CompressorKit:
dlopen(/Library/Frameworks/Compressor.framework/Versions/A/
Frameworks/Compre
ssorKit.framework/CompressorKit, 265): Library not loaded:
/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from:
/Library/Frameworks/Compressor.framework/Versions/A/Frameworks/
StompTypes.fr
amework/Versions/A/StompTypes
Reason: image not found
9/8/09 8:42:41 AM Final Cut Pro[13063] Can't locate CKSource
class.
9/8/09 8:42:41 AM Final Cut Pro[13063] FCP plugin
registration:fcpXMLexport
9/8/09 8:42:42 AM Final Cut Pro[13063] FCP plugin
registration:fcpPROexport
9/8/09 8:42:42 AM [0x0-0x513312e].com.apple.FinalCutPro[13063]
objc[13063]: Class MXFQTApplicationLocator is implemented in both
/Library/Application Support/Final Cut Pro System
Support/Plugins/SonyImportPlugin.bundle/Contents/MacOS/
SonyImportPlugin and
/Library/Application Support/Final Cut Pro System
Support/Plugins/SonyExportPlugin.bundle/Contents/MacOS/
SonyExportPlugin. One
of the two will be used. Which one is undefined.
--
Wes Plate
Automatic Duck, Inc.
http://www.automaticduck.com
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Pro-apps-dev mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Pro-apps-dev mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
@zaxwerks.com
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Pro-apps-dev mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden