Re: Harlequin
Re: Harlequin
- Subject: Re: Harlequin
- From: email@hidden
- Date: Mon, 18 Mar 2002 08:42:12 EST
In a message dated 3/17/02 10:11:47 PM, email@hidden writes:
>
I'm looking for some advice on color management and the Harlequin rip.
>
Specifically, I'm trying to use an Epson 9000 setup in the rip, (printing
>
over
>
a network, ethernet card, diconnected from fiery, the rip is also used
>
for
>
some older film plotters). I've read in the calibration scale acording
>
to the
>
instruction for the epson and out put my profile chart (printed from PS6)
>
with
>
no problems. I import the profile into the rip and set it up as the device
>
profile. I print the PDI test file (the one with the kids on the bottom).
>
The color is off, but not to bad, but it's a little hard to judge from
>
all the
>
black ink dripping from the shadow areas. This didn't happen with the
>
profile
>
chart. Any thoughts and advice is appreciated.
Harlequin RIPs were not originally designed for inkjets, and can be a real
challenge, since there is no direct control for ink limiting... as you have
noticed!
C. David Tobie
Design Cooperative
email@hidden
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.