Re: Loading profiles into Fiery RIP
Re: Loading profiles into Fiery RIP
- Subject: Re: Loading profiles into Fiery RIP
- From: email@hidden
- Date: Wed, 22 Nov 2000 00:51:15 +0100
In the ColorWise II user interface, the calibration target is seen as a
part of the 'Output Profile'.
However, internally these are two different things, one is the calibration
target, the other is a
real ICC profile for output. Both are combined in the 'Output Profile'.
The ICC profile in the 'Output Profile' is only used, when a) Simulation is
ON, or b) RGB data is
converted.
If you choose Simulation = None, then NO ICC profile is used for output.
BUT the calibration is
still applied.I made a profile and tested it and it4s very close to the
offset print that I use as a reference.
Carl Lamm
John Ross Svensson
email@hidden