Problems with Spectrocam Pro Software
Problems with Spectrocam Pro Software
- Subject: Problems with Spectrocam Pro Software
- From: "publix team" <email@hidden>
- Date: Thu, 9 Aug 2001 14:43:18 +0200
Problems with Spectrocam Pro Software:
When I select to measure a "New CMYK Dotgain Strip" I get the
window where to first measure the 100% densities. The Problem
I have here is that the black patch doesn't show any values in
the Spectrophotometer window. The OK appears in the black patch
but the values are the values that were measured in the cyan patch
(even if I measured magenta and yellow successfully after that)
before I went to black.
If I confirm with OK and then measure the black patch as
dotgain patch I get a Vis of 1.96 .. this is what I expect to
measure.
Since I need to the reference 100% density for the percentages
to be calculated correctly I can't continue until there is
a fix for this.
I had this before and suddenly all was fine without me understanding
why. Now I have to do some measuring and it happens again.
This happens with 1.5, 1.6proBETA, and 1.61Final.
Help !
Daniel