AW: Epson 3000 w/BestColor Designer Edition?
AW: Epson 3000 w/BestColor Designer Edition?
- Subject: AW: Epson 3000 w/BestColor Designer Edition?
- From: Martin Hinkämper <email@hidden>
- Date: Mon, 25 Jun 2001 12:51:56 +0200
Hi Dick,
>
I spoke with a teck support person from Best who said that Designer
>
Edition only supported canned output profiles for the various machines
>
it worked with. Custom input profiles were fine, but custom output
>
profiles were not. No info on whether improvements were expected.
I think I have to explain this.
Starting in version 1.1 it is possible to choose an input-profile in
BESTColor Designer Edition.
For that, on the color-management tab choose "rgb->cmyk with profile" and
then you can select a rgb-profile.
BEST regards
Martin Hinkaemper
Product Manager
BEST GmbH
Tel:+49-(0)2151-7627-100
Mevissenstr. 65
Fax:+49-(0)2151-7627-200
47803 Krefeld
mailto:email@hidden
Germany www.bestcolor.com
Visit the BESTColor-Forums at
http://forums.bestcolor.com
>
-----Urspr|ngliche Nachricht-----
>
Von: Dick Busher [mailto:email@hidden]
>
Gesendet: Samstag, 23. Juni 2001 18:04
>
An: colorsync-users; email@hidden
>
Betreff: Re: Epson 3000 w/BestColor Designer Edition?
>
>
>
CDTobie responded to my earlier post re. use of a 3000 or 5500 Epson
>
with BestColor rip:
>
>
>Either machine would make a good proofer, though the 5500 requires
>
careful lighting control due to metameric inks, and may not be capable
>
of some colors the 3000 can reach (and in turn may hit a few the 3000
>
fails to match, in the yellows) The Epson StylusRIP should not be
>
considered as a proofing RIP, as it lacks basic necessary
>
functions for
>
this, but the BestRIP among others would allow the 3000 to do accurate
>
CMYK proofing. Andrew Rodney should be able to tell you just where the
>
Designer Edition is in its ability to run cross profile proofing with
>
custom profiles. It seem to have reachedthat point, but with certain
>
limitations.
>
>
I spoke with a teck support person from Best who said that Designer
>
Edition only supported canned output profiles for the various machines
>
it worked with. Custom input profiles were fine, but custom output
>
profiles were not. No info on whether improvements were expected.
>
_______________________________________________
>
colorsync-users mailing list
>
email@hidden
>
http://www.lists.apple.com/mailman/listinfo/colorsync-users