Re: Using DTP41 to read densities
Re: Using DTP41 to read densities
- Subject: Re: Using DTP41 to read densities
- From: "TL Chapman" <email@hidden>
- Date: Mon, 11 Feb 2002 08:59:12 -0500
----- Original Message -----
Sent: Sunday, February 10, 2002 1:01 PM
Subject: RE: Using DTP41 to read densities (Lee Blevins)
Lee, X-rite has a plug in that allows you to read the data and have it displayed
in an MS Excel spreadsheet. I do not remember the actual file name yet it works
like a champ.
Perhaps one of the X-Rite representatives can provide the name.
I can be contacted off line as I have a spread sheet setup for gathering
multiple areas and charting it.
Thom Chapman
Color Management Consultant
Advanced Technical Solutions, Inc.
Email: email@hidden
"Use what talent you possess: the woods would be very
silent if no birds sang except those that sang best." -Henry Van Dyke
>
Message: 7
>
To: email@hidden (Colorsync l ist)
>
Subject: Using DTP41 to read densities
>
From: email@hidden (Lee Blevins)
>
Date: Sun, 10 Feb 2002 09:31:03 -0500
>
Organization: Digital Graphics, Inc.
>
>
I have the need to read the densities of a 21 step gray scale in CMYK.
>
>
Currently we are reading one square at a time and writing them down.
>
>
This is very time consuming.
>
>
Is there a software for the DTP 41 that will let me read a standard 21
>
step scale and print out the densities?
>
>
By 21 step I mean, 0 - 100 in 5 percent increments.
>
>
Or, is there s/w that will let me create my own scale and have the DTP
>
read it and print out the values?
>
>
End of colorsync-users Digest
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.