Re: Profiling Epson 5000 with Fiery
Re: Profiling Epson 5000 with Fiery
- Subject: Re: Profiling Epson 5000 with Fiery
- From: Steve Upton <email@hidden>
- Date: Sun, 28 Jul 2002 10:20:16 -0700
At 1:07 PM +0100 7/27/02, Pete Carter wrote:
>
Just trying to get the best out of a 5000 proofer at the moment. Does anyone
>
know the best default setting on the RIP to use before profiling. I presume
>
anything that doesn9t get applied via profile will output with this setting.
>
Trying each one gets wildly different results! The RIP is at the moment set
>
to the following:
>
RGB Source:EFIRGB
>
Rendering Style: Color Proofing-Photo
>
CMYK Simulation Profile: SWOP-COM/M
>
Pure Black Text/Graphics: On
These sound OK but the most important thing I have found is to profile it as an RGB device as it goes through an internal CMYK->RGB->CMYK conversion anyway.
That and don't set your hopes too high.
Any other RIP will probably work better...
Regards,
Steve
________________________________________________________________________
o Steve Upton CHROMiX www.chromix.com
o (hueman) 866.CHROMiX
o email@hidden 206.985.6837
________________________________________________________________________
--
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.