Inkjet Proofer Separation Parameters
Inkjet Proofer Separation Parameters
- Subject: Inkjet Proofer Separation Parameters
- From: Jack Kelly Clark <email@hidden>
- Date: Tue, 28 May 2002 10:22:20 -0700
I am profiling a commercial printer's HP5000PS inkjet proofer, which
they have carefully calibrated to their presses. I'm using
ProfileMaker 3.1.5. When setting the Separation Parameters for the
profile, should I use the numbers I got from the prepress manager
(UCR,Total Ink 310%, Maximum Black 98%, and Black Start ?) or
should I use one of the canned Inkjet Separation Parameter sets in
ProfileMaker?
BTW, I've found the Black Start parameter to be very confusing both
for me (especially me) and many of the prepress managers I deal with.
Does ProfileMaker 4.0 clarify this issue? Can someone offer a
understandable explanation of Black Start? (For the situation
outlined above, I'll probably use a black start setting of 40%.)
Thank you,
Jack Kelly Clark
Principal Photographer
DANR Communication Services
University of California
1441 Research Park Drive, #110
Davis, CA 95616
(530) 757-8987
http://anrcatalog.ucdavis.edu
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.