Re: Inkjet Proofer Separation Parameters
Re: Inkjet Proofer Separation Parameters
- Subject: Re: Inkjet Proofer Separation Parameters
- From: email@hidden (Lee Blevins)
- Date: Wed, 29 May 2002 08:43:10 -0400
- Organization: Digital Graphics, Inc.
>
BTW, I've found the Black Start parameter to be very confusing both
>
for me (especially me) and many of the prepress managers I deal with.
>
Does ProfileMaker 4.0 clarify this issue? Can someone offer a
>
understandable explanation of Black Start? (For the situation
>
outlined above, I'll probably use a black start setting of 40%.)
Black start could be one of those terms like GCR that gets defined
differently depending on who is doing the definition.
In one sense it could be where on the scale the black printer starts.
For example, in the old days of scanner setups we might say the black
starts at where the cyan is 50 percent. This would be a "skeleton" black
by some definitions. If we started the black higher on the scale, say
where the cyan is 25 percent it would be a "longer" black.
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.