Re: ColorPass Z-Series, Characterization & Simulations
Re: ColorPass Z-Series, Characterization & Simulations
- Subject: Re: ColorPass Z-Series, Characterization & Simulations
- From: neil snape <email@hidden>
- Date: Wed, 29 May 2002 19:59:23 +0200
on 29/05/2002 19:48, Scott Olswold at email@hidden wrote:
>
1. Perform the Gradation Auto Adjust on the copier.
>
2. Calibrate the Z to the copier using the densitometer (DTP32) method. I
>
like using the 11x17 patch because it provides more density values.
>
3. Send the target using the CMYK Simulation of NONE. This results in output
>
that has been calibrated.
>
4. Measure and build.
>
>
Every time you calibrate, you'll have to build another profile, but the
>
results are more accurate in the long run.
I'm curious to know if and how you could use this method with the
linearisation function of Profile Maker 4. IF you calibrate with the method
above would it be enough to then print the calibration from Gretag and
update the (previously built) profile?
Neil Snape email@hidden
http://mapage.noos.fr/nsnape
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.