RE: ColorPass Z-Series, Characterization & Simulations
RE: ColorPass Z-Series, Characterization & Simulations
- Subject: RE: ColorPass Z-Series, Characterization & Simulations
- From: David Macy <email@hidden>
- Date: Thu, 30 May 2002 07:56:55 -0700
On Wed, 29 May 2002
Scott Olswold wrote:
>
1. Perform the Gradation Auto Adjust on the copier.
>
2. Calibrate the Z to the copier using the densitometer (DTP32) method. I
>
like using the 11x17 patch because it provides more density values.
>
3. Send the target using the CMYK Simulation of NONE. This results in
output
>
that has been calibrated.
>
4. Measure and build.
>
>
Every time you calibrate, you'll have to build another profile, but the
>
results are more accurate in the long run.
Scott, I'm not sure why you said that you need to build another profile
after every calibration. The purpose of calibration is to bring the printer
back to the state in which it was profiled.
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.