• Open Menu Close Menu
  • Apple
  • Shopping Bag
  • Apple
  • Mac
  • iPad
  • iPhone
  • Watch
  • TV
  • Music
  • Support
  • Search apple.com
  • Shopping Bag

Lists

Open Menu Close Menu
  • Terms and Conditions
  • Lists hosted on this site
  • Email the Postmaster
  • Tips for posting to public mailing lists
Re: getting profiles to show
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: getting profiles to show


  • Subject: Re: getting profiles to show
  • From: email@hidden
  • Date: Sun, 17 Nov 2002 13:59:10 EST

In a message dated 11/17/02 12:53:34 PM, email@hidden writes:


>
> I'm running an 1160 Epson printer with a CIS. I've used profiles
> generated with ProfilerPro and a Spectrocam with good results in 9.2
> and have been working in 9.2.2. FWIW I'm running thinned Xtreme Gamut
> inks on Ilford roll paper cut as needed. Results are quite nice.
>
Yes, that is quite a workable combination...
>
> I am trying to switch to OSX for all work and Epson has finally
> produced a driver for OSX for the 1160. The driver seems to work
> alright in normally text printing, but I can't get the printing
> profiles to show up in the "color management" box in the print dialog
> box for the 1160. The box is simply blank when "colorsync" is chosen.
>
This box appears to be broken... I've seen it blank on a range of Epson OS X
drivers as well.
>
> I have put the profiles in all OSX libraries that will allow additions.
> I have run the colorsync utility that checks and repairs profiles, it
> shows them to be ok. The profiles do show up in photoshop 7 in
> "image>mode>apply profile", though I haven't tried that as a printing
> solution.
>
> Ideally, I would like to apply the profile while printing under the
> colorsync mode in the printer dialog box as I have in 9.2.2.
>
Well, it would be nice to have this option, but from Photoshop its more
convenient to apply the profile in the bottom of the main print window
anyhow, and that method isn't broken. For Photoshop 7 you need to use print
with preview, and then chose the advanced options at the bottom of the main
print window, and change to popdown window to color management, then the
print space and other color management options appear. This should work fine
with your existing profiles. If not, set the print space to same as source,
print a new 729 patch target, and build a profile from it to use under OS X.


C. David Tobie
Design Cooperative
email@hidden
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives: http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.

  • Prev by Date: getting profiles to show
  • Next by Date: Re: Replacement for PressReady?
  • Previous by thread: getting profiles to show
  • Next by thread: getting profiles to show
  • Index(es):
    • Date
    • Thread