Yellow monitor profile.
Yellow monitor profile.
- Subject: Yellow monitor profile.
- From: Simon Olding <email@hidden>
- Date: Mon, 1 Dec 2003 23:06:55 +1000
Hi all
I have a strange phenomenon happening when profiling a Mitsubishi
Diamond Plus 93SB.
I have profiled this monitor several times before to 6500K , Gamma 2.2
using PM 4.1.5 and i1 pro. On each occasion it has produced a
reasonable profile.
On this occasion, having gone through the usual steps of setting
brightness, contrast and RGB gain, I created the profile and everything
seemed to go as normal. When asked if I wanted to set the monitor
profile as the system profile I accidentally said yes.
I am running the 93SB as second monitor off a G4 1Ghz powerbook OSX
10.2.7, so the system profile is usually set to the PB display.
When I clicked on the new profile in the Monitors control pannel, the
93SB went really yellow, even more yellow than D50. If I click on an
older monitor profile made with the same settings, the monitor returns
to normal.
I have tried creating a new profile aboout 5 times under different
lighting conditions, including black.
I have tried resetting the monitor to default factory settings.
I have looked at the old and new profile in ColorThink 3D graphing and
they overlap identically.
The monitor looks fine all through the calibration, and even after the
profile is made but the moment you touch the monitiors color tab, it
all turns yellow.
Is there any way to reset the video card in this machine (if that may
be causing this problem)? Could having set the CRT monitor to the
system profile (normally LCD) have triggered this. I have since
reprofiled the LCD and set it as the system profile.
Any ideas out there.
Thanks,
Simon Olding
ICC Imagetec
email@hidden
(03) 6223 7882
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.