Re: Profile Selection with Epson printers under OS X
Re: Profile Selection with Epson printers under OS X
- Subject: Re: Profile Selection with Epson printers under OS X
- From: email@hidden
- Date: Wed, 19 Feb 2003 20:31:32 EST
In a message dated 2/19/03 5:26:25 PM, email@hidden writes:
>
I am in PS6 on OS9.2.2 using an epson 2200
>
>
I believe i understand that one should use EITHER the PS colour
>
management and therefore choose Same as Source in the Espon printer
>
driver window
>
No, you typically use Photoshop color managment by choosing the profile in
the main print window, and set the Epson driver's advanced settings to no
color managment... converting with convert to profile and then using same as
source at the bottom of the print window offers the same result, but is less
convenient.
>
OR use the printer colour management
>
Printer color management assures the proper source profile is forwarded to
the printer; needed if the driver is to make an accurate conversion...
>
or the printer profile
>
No, choosing the printer profile in the space where printer color management
is an option, would actually be using Photoshop color management, as its
Photoshop that hacks this option into the print window.
>
and no colour adjustment in the printer driver window.
>
That would be used when a profile is being applied via Photoshop using
convert to profile or the space box at the bottom of the main print window,
but not when printer color management is selected... if you choose to send
the source profile info to the driver, you need to select the output profile
in the driver's ColorSync of ICM section to perform the conversion...
>
IS that correct??
>
>
>(in Photoshop's Print w/ Preview)
>
When you talk about setting the Print space I assume that in PS6 this is
>
"proof set up" correct? and there I should chose my SP2200 Standard
>
....what is the difference between MK and PK? I should also select the
>
same "Output Device" in the ColorSync profiles?? Also in the Colorsync
>
profile what do I use for "Proofer"
>
>
You specifically say
>
> Black point compensation OFF
>
in the photoshop set up
>
The only place I see that is under color set up in PS6
>
Is that what you are recommending in PS6 with OS 9.2 for an Epson2200?
>
>
Do you feel the RGB workshspace should be Adobe RGB(1998) or what??
>
Does the CMYK workspace in PS colour settings affect the output on the
>
epson?
>
AND please pray tell how does one choose between Conversion engines Adobe
>
ACE and Apple Colorsync or Apple CMM?
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.