Re: Repetitive Calibration with Optical
Re: Repetitive Calibration with Optical
- Subject: Re: Repetitive Calibration with Optical
- From: "Bertho Boman" <email@hidden>
- Date: Sat, 11 Jan 2003 14:10:50 -0500
- Organization: Vinland
Thanks John,
I found the OSD repositioning so that is great. One less headache.
On the "Calibrate" issue:
Under the "File" menu there are separate entries for step by step,
PreCal, Calibrate, Profile Validate and finally the combination
Calibrate&Profile. Based on that, I would expect the button labeled
"Calibrate" to do just that, not "Calibrate&Profile".
On the PreCal issue not disabling previous adjustments:
Start OptiCal, select PreCal and proceed to the point where the gun
adjustments are made. Now if the checkmark in OptiCal for "Calibration"
is toggled, the measured gun values change. I can go back and forth to
PreCal and repeat it multiple time and the settings do not change as
long as I keep "Calibrate" turned off. PreCal should automatically
disable it.
The 0.30 and 80.0 and 6500K numbers come from default values in the
OptiCal manual. I will try the brighter screen as you suggest.
I still do not understand why I get three different brightness readings
between PreCal. Calibrate and the Info printout.
Bertho
----- Original Message -----
From: <email@hidden>
To: "Bertho Boman" <email@hidden>
Sent: Saturday, January 11, 2003 12:42
Subject: Re: Repetitive Calibration with Optical
>
>
Bertho
>
on issue 2 your monitor should have an adjustment for you OSD and you
>
should be able to move it out of the way.
>
and after you set your colortemp and balanced your guns in precal did
you
>
select native for white point,you have already adjusted for your white
>
point in precal.
>
oh one more thing that i try to do is when i start to calibrate i
launch
>
optical and get to the window that asks to attach the spyderplace it
there
>
and then quit out after and go back to precal.
>
and i believe that they are calling it calibrate in optical because
they
>
are asking you to set you contrast and brightness and then it will
profile
>
the monitor.i try not to adjust anything once i get into optical,i set
>
luminance in precal and if i need to adjust brightness i quit out and
go
>
back to precal and make sure everything is still good.
>
i am on a mac and using optical 3.7 and the luminance i set in precal
i get
>
in optical very close anyway.
>
why do you have a target of .31 &80.1,80 will be very gray you may
want to
>
set it 90 or95 if you can hit that.what is your red gun at ? are you
maxed
>
out ?
>
im not PC orientated for colormanagement but thought i would throw
some
>
stuff by you.
>
good luck
>
>
john
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.