Re: US Sheetfed Coated v2 TR001?
Re: US Sheetfed Coated v2 TR001?
- Subject: Re: US Sheetfed Coated v2 TR001?
- From: Jim Rich <email@hidden>
- Date: Wed, 07 Apr 2004 08:10:11 -0400
On 4/6/04 9:27 PM, "bruce fraser" <email@hidden> wrote:
>
>
And that's about all anyone has been able to determine!
>
Yes it would have been a good idea if Adobe has documented that press run
with solid ink density etc. However, if you look were to plot, say
original density vs output % dot value, you would see that the tone
reproduction and gray balance are very traditional and have been proven to
work well for sheet fed printing for 30+ years. So while there is no hard
data from when Adobe made the sheet fed press run, there is some data that
indicates if you run densities for CMYK using a sheet fed guidelines the
Sheet fed profile you will get reasonable results. My guess is that the
solid densities are some thing like this C= 1.4, M=1.3, Y=1.0 K-1.5. And
the dot gain is around 20%. I am sure mileage will vary.
My .02
Jim Rich
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.