Epson 10600 & 9600 Printers
Epson 10600 & 9600 Printers
- Subject: Epson 10600 & 9600 Printers
- From: John Wickham <email@hidden>
- Date: Thu, 14 Apr 2005 09:13:58 -0700
On wed.Apr.13,Daniel Vezina writes:
On 4/13/05 12:04 PM, "email@hidden"
<email@hidden> wrote:
> The success is adjustment. If the printer's head are in good shape and
> clean, you must check the paper feed length adjustment if you have banding.
> This is the most capricious adjustment on all Epson printer. Epson printer's
> paper feed mechanism design is weak. Also this adjustment will vary with the
> weight and the type of paper used. On my 9000, I can't program more than one
> paper feed length adjustment but I think you can program 4 on the 9600. One
> for each media you use.
>
> The Bi-D is also a difficult adjustment to do. You can't get it perfect. (my
> 9000 is too old for that). But it's usable bigger than 11X14" print (where
> peoples will not look at the picture with the nose on it). Note also that if
> you want to use Bi-D you must have a perfect thickness adj too and you must
> not forget to switch the media thickness type on the printer to match the
> paper you use in it. If the Bi-D adj is good, if the thickness adj is good
> too, and if the paper length adj is perfect, your 9600 at 360 dpi should
> print about as good as my 9000 in 720.
>
> All adjustment require that you run the printer in maintenance mode to make
> them.
"And the truth will set you free"
Johm Wickham
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden