Re: profile reddish shift in grayscale
Re: profile reddish shift in grayscale
- Subject: Re: profile reddish shift in grayscale
- From: m c <email@hidden>
- Date: Thu, 2 Jun 2005 08:31:04 +0200
Marco this is my iDiagnosis. It say PASS but I don't know if it OK.
Thanks
General Information
Date and Time: 02/06/2005 8:21:52
Application version: Version 2.1.0
Driver version: Version 3.1.0 Build 103
Platform: Microsoft Windows
Device Information
Device type: Eye-One Pro (NO filter) [ Ambient Light Emission
Reflectance Reflectance Scan Flash ]
Serial number:
Firmware version: 202
CPLD version: 2
Dark measurement count: 6575
Lamp burning time: 16601.8 seconds
Spot measurement count: 5376
Scan measurement count: 0
Dongle Test
Module "Scanner" is licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is licensed
Module "Editor" is licensed
Button Test
Button is working normally
Calibration
Emission calibration :Successful
Emission Test
White measurement (X=73.961 Y=79.879 Z=86.530)
Gray measurement (X=26.613 Y=28.524 Z=32.897)
Black measurement (X=0.229 Y=0.245 Z=0.252)
Red measurement (X=32.994 Y=17.701 Z=1.734)
Green measurement (X=26.769 Y=55.445 Z=9.352)
Blue measurement (X=14.462 Y=7.237 Z=76.072)
Emission Test: Pass
Dark Measurement
Dark measurement: Pass (-37.367)
Noise Measurement
Noise measurement: Pass (3.025)
Lamptest
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful
Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Pass (LOT=16602.4 seconds CIT=0.01353 LIT=0.0144854)
Scanning calibration: Successful
Reflectance scan test: Pass
Measurement 1 (L=95.765 a=-0.493 b=2.411)
Measurement 2 (L=95.989 a=-0.535 b=2.273)
Measurement 3 (L=95.998 a=-0.520 b=2.274)
Measurement 4 (L=95.979 a=-0.530 b=2.263)
Measurement 5 (L=95.998 a=-0.522 b=2.273)
Measurement 6 (L=95.973 a=-0.528 b=2.272)
Measurement 7 (L=95.974 a=-0.523 b=2.255)
Measurement 8 (L=95.969 a=-0.516 b=2.292)
Measurement 9 (L=95.982 a=-0.527 b=2.264)
Measurement 10 (L=95.985 a=-0.513 b=2.260)
Reflectance drift test: Pass (0.0498783)
*** PASS ***
On 6/2/05, Marco Ugolini <email@hidden> wrote:
> In a message dated Wed, 1 Jun 2005 23:54:24, m c wrote:
>
> > I'm really disappointed because it was my 2nd eye one pro, the first
> > arrive defective. Do you think that the GMB teach support could help
> > me? Will be any way to solve this with profile editor?
> > I can understand that I so expensive device has this lacks...Argggg!!!
>
> Have you tried to run your EyeOne Pro through the EyeOneDiagnostics utility?
>
> It is freely downloadable on the GretagMacbeth site at
> <http://www.gretagmacbeth.com/mac/index/products/products_color-mgmt-spec/pr
> oducts_cm-for-creatives/products_eye-one-photo/products_eye-one-photo_softwa
> re.htm>.
>
> You should be able to use it to assess whether or not your unit passes a
> number of standard tests (dongle test, button test, calibration test,
> emission test, dark measurement, noise measurement, lamptest, reflectance
> test). For each test you get a clearly worded result ("pass" or
> "successful," etc.).
>
> You can also save the results in a diagnostic log, if you wish, so that you
> can keep a record of your device's state at any one time, or share the
> results with the GretagMacbeth technical support team.
>
> It would be interesting to see what results you get if you put your EyeOne
> spectrophotometer through the EyeOneDiagnostics routine. Please let me know
> the results if you do.
>
> Best of luck to you.
>
> --------------
> Marco Ugolini
> Mill Valley, CA
>
>
>
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden