Re: EFI Fiery PS-NX600 RIP
Re: EFI Fiery PS-NX600 RIP
- Subject: Re: EFI Fiery PS-NX600 RIP
- From: Rob Griffith <email@hidden>
- Date: Tue, 07 Mar 2006 09:16:11 +0000
- Thread-topic: EFI Fiery PS-NX600 RIP
> Hi Rob
>
> Doesn't "Simulation > None" only turn off rgb-cmyk-simulation while
> keeping the output profile active? I cannot say "None" for the output
> in the Colorwise setup or in the client's driver menu and have the
> choice only between my managed output profiles in a Fiery X12 RIP. I
> want to profile different paper stocks in a Xerox DC12.
>
> Burckhart Seifert
> http//:www.colortaxi.de
Hi Burchart
Profiles always work in pairs. Source and Destination. By setting the
simulation profile to None you are denying the RIP a CMYK source profile.
RGB to CMYK simulation is handled by a different option. If the RIP has no
CMYK source it cannot use the CMYK output profile.
Most Fiery Rips are pretty similar and so the None option should be there,
it won't be with any OS or Application profile options but actually in the
printer set up. Check you have the latest driver and ColorWise Pro versions.
Regards
Rob
On 7/3/06 08:58, "Burckhart Seifert" <email@hidden> wrote:
> Am 17.02.2006 um 07:50 schrieb Rob Griffith:
>>> A client of a client has a Canon CLC1180 driven by a Fiery PS-NX600.
>>> They are asking about possibility of calibration and profiling. I
>>> know that the regular calibration routine (which they never do!) uses
>>> the scanner part of the copier to read in a 60-step chart. Can this
>>> be done by plugging in a spectro (DTP41 etc)?
>>> Can't seem to get any technical info on EFI website. Is there a
>>> secret techie website?
>>> Is it possible to create accurate profiles. Can the rip's
>>> conversions be disabled in order to do this?
>>> Can paper or reference profiles be downloaded (over ethernet or from
>>> laptop plugged in) to the Fiery?
>>> I know that traditionally ColorSyncers haven't had a lot of luck with
>>> EFI (I certainly haven't appart from the excellent Best Rip.).
>>> Any tips would be appreciated.
>>> Many thanks in advance
>>
>
>
>> Hi Phil
>> ...
>> When you output the profile patches make sure that in the Printer
>> options
>> under the Colorwise section that CMYK Simulation is set to None.
>> This will
>> turn off the colour management but leave the calibration active.
>>
>> After building the profile you can go back to Colorwise Pro Tools
>> and use
>> the Profile Manager function to copy over your profile, and your
>> simulation
>> profile of choice, to the Rip and set them as defaults.
>>
>> I do this a lot and it all works very well. The results are good, but
>> dependent on how stable the copier is. Give me ring if you get stuck.
>>
>> Rob Griffith
>> www.nativedigital.co.uk
>> www.colourcollective.co.uk
>>
>
>
>
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden