Re: Gutenprint CMYK
Re: Gutenprint CMYK
- Subject: Re: Gutenprint CMYK
- From: Phil Cruse <email@hidden>
- Date: Tue, 12 Sep 2006 11:08:17 +0100
- Authenticated-sender:
| Hi Edmund I have been using the "Release candidate" (beta?) software for Gutenprint v5.0 .0.RC3 and now have V5.0 which I have only briefly played with. I have profiled my Epson and a few others. You will need to use the settings to get the IT8 Or ECI chart as close as possible for Grey Balance and gradation before profiling. There are many adjustments possible in the rc3 version, don.t know about v5.00, I assume so. I use CMYK, Color Precision and Print Quality set to Best; Ink Type "6 color photo"; Image Type "Photograph". I had a heavy Cyan cast, so adjusted Cyan Density to 0.70. Black Ink is also very heavy, so adjusted this to 0.70. Color Correction is set to "Uncorrected". There is also a "Raw" setting. However I believe this may give over-inking, etc. I believe the other settings are for folks not using Colour Management. Perhaps Robert from Gimp can add to this. Good Luck
Subject: Gutenprint CMYK Message-ID: Content-Type: text/plain; charset=ISO-8859-1; format=flowed
It's time for me to look at the Gutenprint CMYK mode.
Could the owners of this driver please tell me what setting I should be using to profile it ?
Edmund
|
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden