Re: Gutenprint 5 and profiles
Re: Gutenprint 5 and profiles
- Subject: Re: Gutenprint 5 and profiles
- From: Robert L Krawitz <email@hidden>
- Date: Sat, 30 Sep 2006 09:43:06 -0400
From: "Millers' Photography L.L.C." <email@hidden>
Date: Fri, 29 Sep 2006 20:34:25 -0700
I found "Uncorrected" in Output control extra 1 2. So, I now know
where that is.
Please help me understand and know what kind of "Interleave Method"
to use. For the Pro 9600 there are eight choices. For the other
three printers there are six choices.
Standard, off, interleave, full overlap, four pass, full overlap 2,
interleave 2, and eight pass, for the Pro 9600.
In this case (for the Pro printers), use the setting that Epson
suggests (or experiment). These settings were copied from the
programming manual, and I think that they actually correspond to
settings Epson provides, but I don't know for a fact (i. e. I don't
have access to this printer or the Epson driver).
For the other three printers there are standard, alternate fill,
ascending fill, descending fill, ascending double, and nearest
neighbor avoidance.
Just leave that at the default (Standard) for the non-Pro printers.
I send 180 ppi images to my printers and print at 720 dpi. 98% of
my printing is fine art on the Pro 9600.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden