Re: HP Z2100 dry times
Re: HP Z2100 dry times
- Subject: Re: HP Z2100 dry times
- From: Derek Lambert <email@hidden>
- Date: Thu, 19 Apr 2007 14:14:09 -0400
Jim,
Are you talking about profiling mx4 and mx5 or just the calibration
with mx3?
According to gmg - 10 min is enough for Z2100 mx3 chart.
I don't think you can really profile Z2100 with only build in i1.
Can you? without ANY external spectro for gamut files or mx4 /mx5
iterations?
-------------------------
Derek Lambert
Director of Prepress Services,
Color and Information Technologies
On Apr 19, 2007, at 1:04 PM, Jim Rich wrote:
I am getting involved with profiling an HPz2100 and using the on board
spectro with the GMG rip.
In the HP/GMG process you can set up a time delay before the HP
measures the
color patches. So the printer prints the patches and then waits to
pull the
paper back into the printer where the measurements take place.
After the
measurements the print is cut.
So while you are waiting for the print to dry back you cant print
anything.
Does anyone have any guidelines for how long one should wait before
measuring the patches.
Thanks
Jim Rich
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
40litho-art.com
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden