Re: DTP70 max thickness
Re: DTP70 max thickness
- Subject: Re: DTP70 max thickness
- From: "edmund ronald" <email@hidden>
- Date: Tue, 2 Jan 2007 23:43:24 +0100
use the utility to cut up the chart in the future ?
Edmund
On 1/2/07, R
Robert Rock <email@hidden> wrote:
I finally successfully profiled charts printed on 350gsm WITH matte
lamination, so the subsequent thickness is even greater. The problem I had
was that each chart would get about halfway finished and then it would eject
the media. So I'd have to start all over on that chart. But finally, after
about 5-7 trys on each chart, it completed all rows. The resulting profile
is fine and works well. But it was a pain in the ass to get there. But it
should work.
Bob
-----Original Message-----
From: colorsync-users-bounces+bobrock=email@hidden
[mailto:colorsync-users-bounces+bobrock=email@hidden] On
Behalf Of edmund ronald
Sent: Tuesday, January 02, 2007 11:14 AM
To: Olivier Desmaison
Cc: email@hidden
Subject: Re: DTP70 max thickness
Send me a chart and i will try
On 1/2/07, Olivier Desmaison <email@hidden> wrote:
> Have you ever tried ?
> Olivier
>
> ----- Original Message -----
> From: "edmund ronald" <email@hidden>
> To: "Olivier Desmaison" <email@hidden>
> Cc: <email@hidden>
> Sent: Tuesday, January 02, 2007 2:43 PM
> Subject: Re: DTP70 max thickness
>
>
> > Why not try ? I have a DTP70 in Paris ...
> >
> > Edmund
> >
> > On 1/2/07, Olivier Desmaison <email@hidden> wrote:
> >> I know the manual limits the DTP70 to 0.14" media thickness, yet is
> >> that conservative or the actual maximum ? I'd like to profile
> >> Hahnemuhle Rag 308gr, 0.48mm (about .019"), has anyone tried/succeeded
?
> >>
> >> Olivier
> >>
> >> _______________________________________________
> >> Do not post admin requests to the list. They will be ignored.
> >> Colorsync-users mailing list (email@hidden)
> >> Help/Unsubscribe/Update your Subscription:
> >>
> gmail.com
> >>
> >> This email sent to email@hidden
> >>
> >
>
>
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
m
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden