Re: Offset Euro pos U360 K85
Re: Offset Euro pos U360 K85
- Subject: Re: Offset Euro pos U360 K85
- From: Graeme Bulcraig <email@hidden>
- Date: Wed, 24 Sep 2008 08:46:47 +0100
Thanks Klaus, Peter and Phil.
I thought this might be the case.
We (of course) are well aware and use the current crop of ECI profiles
(proofing with GMG)...
Peter very kindly emailed me a similar one, which we will look at,
but maybe we will suggest they get up to date.
They are also going to email us there one today as well.
FYI they are printers of a nutty snack bar wrapper!
Thanks again
Graeme
On 23 Sep 2008, at 21:09, Phil Cruse wrote:
Hi Graeme
I think you may be correct about Linocolor and it being an old
EuroScale profile.But it could be anybody's. In the old (pre-ISO)
days, many of us used to build our own "EuroScale" profiles for our
customers. With 360 TAC it would be safe to assume that they are
printing sheetfed on a good stock such as Paper type 1 or 2. The
newest and most common ECI profile for this is of course the Fogra
39 data-set based "ISOcoated_v2_eci.icc". This will only give you
about 340% TAC with a Black in the low to mid 90s% using Relative
however, with probably a bit less from Perceptual. These days it is
common to have the Black in the 90's, or even 100%, with
corresponding lower TAC. The UK is rapidly coming around to using
ISO 12647. You could of course use Photoshop's old "Euroscale
Coated V2" which will give about 90% Black. Many UK companies are
still using this, believing it to be an Official Standard.
40touchdigital.co.uk
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden