Calibrating with Spyder3 and Spyder3 Elite 4.0.2 software
Calibrating with Spyder3 and Spyder3 Elite 4.0.2 software
- Subject: Calibrating with Spyder3 and Spyder3 Elite 4.0.2 software
- From: marko ercegovic <email@hidden>
- Date: Mon, 25 Oct 2010 23:47:14 +0200
> From: marko ercegovic <email@hidden>
> Date: October 25, 2010 12:18:07 AM GMT+02:00
> To: email@hidden
> Subject: Calibrating with Spyder3 and Spyder3 Elite 4.0.2 software
>
> Hi,
>
> This is unresolved for me after few days of trying.
> I have tried all options with software and monitor options, but cannot seem to get the proper results:
>
> I am calibrating a few years old NEC Spectraview 1980, on my MBP.
>
> The thing is that 6 months ago, i have produced a profile for this display that had a gamut in satisfactory volume (size)- about as sRGB.
> This is what I expected out of this display, and the visual results were very good (and stilll are ). This was done with same spectrometer, but with older version of software.
>
> For the last few days all calibrations for this display (all different options tried) are consistently resulting in a significantly smaller size gamut. (see att.) as seen in Colorsync.
> This also results in some oddities in the viewed image, mostly in the blue part of the spectrum.
> The setting are: Gamma 2.2
> 5800K or 6500
> 180cd (but it is the same with other settings)
> The NEC has been reseted to factory, then set to 5800, 60hz, cont 50%, brt 80% (or as corresponds to instructions in software)
>
>
>
> In fact, these profiles are similar gamut as the ones I am getting from MBP display (17" LED one, late 2008).
> The best profile for the MBP display is also from six months ago, but the results for this one are in the expected range.
>
> Any help appreciated,
>
>
>
> Marko
>
>
>
>
>
>
>
>
>
>
>
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden