Re: Using all inputs/outputs from MOTU ultralight
Re: Using all inputs/outputs from MOTU ultralight
- Subject: Re: Using all inputs/outputs from MOTU ultralight
- From: William Stewart <email@hidden>
- Date: Thu, 6 Mar 2008 10:44:29 -0800
Todd
Use AULab and create a document that has something like what you want
to cofigure - then from the Debug menu print out the session - you'll
see how we are setting up a matrix mixer to push the input channels
into various channel strips, and then another matrix mixer to route
the final mixes to the selected channels on the device.
Bill
On Mar 5, 2008, at 12:49 AM, Todd Blanchard wrote:
The MOTU ultralight has 8 analog outputs. I'm trying to map them to
outputs of a matrix mixer.
I'm getting an error connecting to output channels other than
channel zero.
I set the number of outputs on the matrix mixer to be the same as
the number of outputs on the ultralight. Then I go spinning through
them connecting the output n of the mixer to the input of output n
of the ultralight. All but channel zero results in an error.
I have similar difficulties connecting to the output of the various
input channels. I can only connect to one. I spent a bunch of time
playing with HALLab. HALLab never seems to enable its controls and
trying the soft play through results in a signal passing from input
3 (the only one I have hooked up) being passed to output 1 (left
channel only) and this is not a clean signal - it just sounds like
static.
So I'm kind of stuck - I'd like to see an example of what amounts to
a virtual patchbay between the inputs and outputs of such a device
using AUGraph and a MatrixMixer in the middle to allow routing from
inputs to outputs.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden