Re: How to translate an Exceed .xs file to the commands to connect via XQuartz?
Re: How to translate an Exceed .xs file to the commands to connect via XQuartz?
- Subject: Re: How to translate an Exceed .xs file to the commands to connect via XQuartz?
- From: Brandon Allbery <email@hidden>
- Date: Wed, 24 Oct 2012 10:23:38 -0400
On Wed, Oct 24, 2012 at 9:18 AM, Chris Jones
<email@hidden> wrote:
You should go through the 6 steps in the debugging tests Jeremy pointed you to. Assuming steps 2 and 3 pass ok, you appear to fail at step 5. You should then check the configuration of sshd on the remote system, to check it is allowing X11 forwarding, as shown in step 6.
Also make sure your dotfiles on the remote (e.g. .cshrc) aren't unsetting $DISPLAY for some reason.
--
brandon s allbery kf8nh sine nomine associates
_______________________________________________
Do not post admin requests to the list. They will be ignored.
X11-users mailing list (email@hidden)
This email sent to email@hidden