Calibration of Fuji Frontier
Calibration of Fuji Frontier
- Subject: Calibration of Fuji Frontier
- From: Simon Olding <email@hidden>
- Date: Mon, 23 Feb 2004 12:01:46 +1100
Hi All,
I am just starting the process of characterising a fuji frontier
system, running glossy and satin stocks. In talking to the operator, he
suggests that it may be hard to profile the system as he feels the
tolerances in the built in device calibration are not tight enough. He
tells me that the calibration strip that is fed into the built in
densitometer is used to modify the internal calibration for all the
paper stocks and sizes. He showed me three samples of the fuji test
print on 10", 4" gloss and 4" satin. The neutrals were slightly
different on each but in particular there was a magenta shift in the
neutrals on the 4" glossy stock compared to the 10" glossy.
Has anyone had any experience with these systems and their built in
calibration? Is the above statement true that the one control strip
balances all the printing stocks? And has anyone any comment about the
tolerances that fuji uses on these machines? The operator tells me that
even though he can see a shift in the different glossy stocks, the fuji
reps tell him it is within tolerance.
Finally, any tricks for profiling these machines. My initial test with
i1 and PM 4.1.5 using the Large Profile setting and Chroma Plus shifted
the blues to a little magenta (bit like a velvia blue sky).
Thanks for any help offered
Simon
Simon Olding
ICC Imagetec
email@hidden
(03) 6223 7882
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.