RE: Profiling Fuji Lanovia scanner.
RE: Profiling Fuji Lanovia scanner.
- Subject: RE: Profiling Fuji Lanovia scanner.
- From: "CS Carl Stawicki \(4211\)" <email@hidden>
- Date: Tue, 6 Jul 2004 08:49:17 -0400
- Thread-topic: Profiling Fuji Lanovia scanner.
Thanks everyone who replied.
Phil, we have Fuji Lanovia Quattros with ColorKit v4. There are Default Range
Target settings in the preferences that you can set prior to each scan. I'll
try to hit the numbers that you suggested.
Carl.
>
----------
>
From: email@hidden on behalf of Phil Cruse
>
Sent: Saturday, July 3, 2004 4:21 AM
>
To: email@hidden
>
Subject: Re: Profiling Fuji Lanovia scanner.
>
>
Hi Carl-
>
There might be some confusion with regard to WHICH Lanovia model you
>
have.
>
It sounds like it is a C550 with C-Scan software? If it is then you
>
will be able to juggle the Range Targets. If it is a newer model and
>
is driven by ColourKit then you cannot access those settings before the
>
image is scanned. If it is a C-Scan model you should use something
>
like 2% white and 99% black, in lowest and highest channels
>
respectively with NO cast adjustment. This will need some
>
experimenting to get it right. You'll need to get about 245-ish in the
>
white and about 10 in the black when viewed in PS. Main thing is no
>
large 255 or 000 areas. Let the scanner do it's ranging. If it is
>
C-Scan you may want to consider an upgrade to Sprint and ColourKit V3
>
on OsX.
>
On Saturday, Jul 3, 2004, at 06:00 Europe/London,
>
email@hidden wrote:
>
>
Good luck
>
Phil Cruse
>
Graphic Quality Consultancy
>
>
email@hidden
>
>
>
>
> Message: 10
>
> Subject: Profiling Fuji Lanovia scanner...
>
> Date: Fri, 2 Jul 2004 14:34:22 -0400
>
> From: "CS Carl Stawicki \(4211\)" <email@hidden>
>
> To: "Colorsync List \(E-mail\)" <email@hidden>,
>
> "ColorKit \(E-mail\)" <email@hidden>
>
>
>
> Hi,
>
>
>
> We recently aquired two Fuji Lanovia Quattro scanners with ColourKit
>
> 4.0.0.
>
>
>
> Can anyone share their experience and thoughts on profiling the
>
> Lanovia? For
>
> instance, what are the optimal Default Range Targets? I'm using
>
> ProfileMaker
>
> 4, with an IT8, and haven't been able to make a better profile than the
>
> default profiles that came with the software.
>
>
>
> I'll appriciate all insight. Thanks,
>
>
>
> Carl.
>
_______________________________________________
>
colorsync-users mailing list | email@hidden
>
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
>
Do not post admin requests to the list. They will be ignored.
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.