Re: GMG and Epson 9800 Proofing
Re: GMG and Epson 9800 Proofing
- Subject: Re: GMG and Epson 9800 Proofing
- From: Thomas Holm/pixl <email@hidden>
- Date: Sun, 27 May 2007 09:27:19 +0200
On 23/05/2007, at 7.46, Steve Lehning wrote:
I was curious to see if I could get some suggestions
on sharpening type on my epson 9800. I am using GMG
Color Proof 4.1.8, I believe, and using GMG 230
stock. It seems as though my type is heavier than it
should be. I did Print head alignment so I have good
registration. On my rich blacks my reverse type is
almost plugged.
First off the GMG Proofing Paper SemiMatte 250g paper has a better
coating so changing to that will improve things slightly. Other than
that setting you anti aliasing to triangle and 5 (it is set to box
and 4 as default) and resolution to 360dpi, or alternatively,
increasing your resolution to 720 dpi with no anti aliasing (in rip
server) will give better results.
FYI you will get even more accurate results with the New HP Z-
printers on GMG due to the higher resolution.
Best Regards
Thomas Holm / Pixl Aps
- Colour Management Consultant
- Seminars speaker and tutor on CM and Digital Imaging etc.
- Apple Solutions Expert
- Member, ColorManagementGroup.com
- www.pixl.dk ยท email@hidden
--
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden