Re: Using all inputs/outputs from MOTU ultralight
Re: Using all inputs/outputs from MOTU ultralight
- Subject: Re: Using all inputs/outputs from MOTU ultralight
- From: Eric Eizenman <email@hidden>
- Date: Thu, 6 Mar 2008 18:06:53 -0800
AU Lab documentation says:
"You can get this information by going to the Debug menu and choosing
Print Session. This will output debugging information to the console."
Eric
On Mar 6, 2008, at 12:49 PM, Todd Blanchard wrote:
So I've managed to accomplish the setup I want in AU Lab. But Debug-
>Print Session does nothing at all. What is it supposed to do? I
have a default printer that works. I see no window. Is there a
file I should be looking for?
On Mar 6, 2008, at 10:44 AM, William Stewart wrote:
Todd
Use AULab and create a document that has something like what you
want to cofigure - then from the Debug menu print out the session -
you'll see how we are setting up a matrix mixer to push the input
channels into various channel strips, and then another matrix mixer
to route the final mixes to the selected channels on the device.
Bill
On Mar 5, 2008, at 12:49 AM, Todd Blanchard wrote:
The MOTU ultralight has 8 analog outputs. I'm trying to map them
to outputs of a matrix mixer.
I'm getting an error connecting to output channels other than
channel zero.
I set the number of outputs on the matrix mixer to be the same as
the number of outputs on the ultralight. Then I go spinning
through them connecting the output n of the mixer to the input of
output n of the ultralight. All but channel zero results in an
error.
I have similar difficulties connecting to the output of the
various input channels. I can only connect to one. I spent a
bunch of time playing with HALLab. HALLab never seems to enable
its controls and trying the soft play through results in a signal
passing from input 3 (the only one I have hooked up) being passed
to output 1 (left channel only) and this is not a clean signal -
it just sounds like static.
So I'm kind of stuck - I'd like to see an example of what amounts
to a virtual patchbay between the inputs and outputs of such a
device using AUGraph and a MatrixMixer in the middle to allow
routing from inputs to outputs.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden